+62-21-344 2919      +62-21-3511 428      +62-811-9119-611   
    deltacrete@gmail.com      Senin - Jumat 9.00 - 17.00

Deltacure PB

Polymer Emulsion Liquid Membrane Concrete Curing Compound


Deltacure PB is a polymer emulsion liquid membrane curing compound, milky white in colour and cures to a clear film.


Provides a film or high water retention enabling curing of the concrete by reducing loss of water form the concrete.


  • Reduces surface shrinkage and cracking by eliminating moisture loss from exposed surfaces
  • Enables cement to hydrate more efficiently
  • Easy application reduces labour costs
  • Save times-can apply as soon as possible after placing concrete
  • Eliminates need for damp hessian, sand or polyethylene
  • Fast forming film dries within 60-120 minutes depending on ambient temperatures and site conditions
  • Forms a non-staining continuous clear film on clean stain free concrete or render surfaces and easily applied and free from discolouration
  • Non-flammable and non-toxic under normal usage and is supplied ready for immediate use
  • Can be over coated with specific after-trade, e.g rendering, painting, etc.



Stir contents thoroughly before using. Spray Deltacure PB evenly as possible over the freshly laid concrete as soon as possible after final trowelling when the surface water has freshly laid concrete as soon as possible after final trowelling when he surface water has disapeared (approx. 1-2 hours depending on ambient temperature and atmospheric conditions). If spray equipment is not available, apply with a soft brush as soon as the concrete surface is hard enough.

Apply to vertical surface immediately after the form work has been removed. Apply at even coverage rate of not greater than 6 sq, mtr per litre.

Ensure the concrete surface is completely free of stains, oils, form coating, etc to obtain good adhesion of Deltacure PB and of any other trades, and to avoid obtaining discolouration or uneven surface effects.


Immediately after use, the spraying equipment should be cleaned out, especially the line and nozzle, with water.


Deltacure PB consists of a stable emulsion based on suitable processed PVA emulsions, plasticizers, etc.

Specific Gravity at 250C 1.00-1.10
Colour Milky White
Dry Film Colour Clear
Dry Time (approx) 1-2 hours
Packaging 30 kg jerigen or 200 kg drum


If contact with the resin occurs, the skin should be washed with soap and water – non solvent. A resin removing cream should preferably used. Goggles should be worn when spraying with a shout lance. Any eye contamination should be washed with plenty of water and medical treatment sought. When used in enclosed areas, good ventilation must be provided.


Deltacure PB is non-flammable.

Our Location

PT. Deltacretindo Wira Mandiri
  JL. Pintu Air IV No. 41A
  Jakarta, Indonesia 10710
  +62-21-344 2919
  +62-21-3511 428
   :  deltacrete@gmail.com

haki cm

© 2017 Deltacretindo. All Rights Reserved. Powered By GM-Portalindo