+62-21-344 2919      +62-21-3511 428      +62-811-9119-611   
    deltacrete@gmail.com      Senin - Jumat 9.00 - 17.00

Deltaproof CB

Cementitious Based Waterproofing Coating

DESCRIPTION

Two-component acrylic polymer modified cementitious coating, which consists of specially selected cements, well-graded fine aggregates and additives supplied in powder form together with a liquid component of acrylic polymer, pre-dosed, ready for use as waterproofing slurry.

USES

For external and internal waterproofing coating, crack sealing on concrete, mortar, brickwork, in basements, swimming pools, water tanks, flat roofs, balconies, terraces, retaining walls, sea walls, tunnels, etc.

ADVANTAGES

  • Deltaproof CB is pre-dosed sets, easy to mix, easy to use,
  • Can be applied by brush or by trowel,
  • Impermeable,
  • Good resistance to abrasion and erosion,
  • Non corrosive,
  • Non flammable,
  • Non toxic and slightly flexible.

COVERAGE

Depending on type of application, 2 coats are always required.

Waterproofing for toilet or bathroom : 1.5 kg/m2 at 0.9mm of thickness.

Waterproofing for swimming pool or reservoir : 3 kg/m2 at 1.8mm of thickness.

INTRUCTIONS FOR USE

The concrete surface should be sound, clean, free of oil, grease, dust or laitance and saturated surface dry. Then pour half of component A (liquid) into mixing vessel, then add all of component B (powder) and mix until you have slurry of uniform consistency.

Add rest of component A and mix again until you have uniform, lump-free mixture.

For mixing, a mechanical slow speed mixer is recommended with mixing time of 2-3 minutes, if Deltaproof CB is to be applied by trowel, use only 90% of liquid component.

APPLICATION

Always apply a minimum of two coats, the first coat on the still damp, pre-wetted substrate. The second coat is to be applied after the first coat has started to set and can support the following coat, usually after 2-6 hours, depending on climate.

CURING

As with all cement based products, curing is important.

Protect the freshly applied product against direct sunlight and strong winds. Use damp hessian or plastic sheet. Protect the applied Deltaproof CB from rain and water splashes until fully hardened, usually after six hours.

PROTECTION

For roofing or other structures directly exposed to ultra violet light, it is suggested that Deltaproof CB is protected with 2-3 cm of cement screed.

TECHNICAL DATA

Form A = liquid B = powder
Colour Concrete grey
Mix Density 2,1 – 2,2 kg/l
Mix Ratio (A:B by weight) for brush application 1: 3
Mix Ratio (A:B by weight) for trowel application 1: 4
Pot Life at 30 degree C Approximately 50 minutes
Compressive strength 300 kg/m2
Flexural strength 80 kg/cm2
Bond strength 11 kg/cm2
Shelf Life 12 months when unopened
Packaging 20 kg set ( 15 kg Powder + 5 kg Liquid )

HEALTH AND SAFETY

Deltaproof CB powder component contains cement powders which, when mixed with the liquid,

release alkalis which can be harmful to the skin. During use, avoid inhalation of the dust and contact with the skin or eyes.

Wear suitable protective clothing - eye protection, gloves and respiratory equipment, particularly in confined spaces. In case of contact with the skin, rinse with plenty of clean water, then cleanse

thoroughly with soap and water. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. If swallowed seek medical attention immediately.

FIRE

Deltaproof CB powder and liquid are non-flammable materials.


PROJECT REFERENCE

Our Location

PT. Deltacretindo Wira Mandiri
  JL. Pintu Air IV No. 41A
  Jakarta, Indonesia 10710
  +62-21-344 2919
  +62-21-3511 428
  +62-811-9119-611
   :  deltacrete@gmail.com

haki cm

Print
© 2017 Deltacretindo. All Rights Reserved. Powered By GM-Portalindo