+62-21-344 2919      +62-21-3511 428      +62-811-9119-611   
    deltacrete@gmail.com      Senin - Jumat 9.00 - 17.00

Deltacoat CSH

Waterproofing For Mansory And Concrete

DESCRIPTION

Deltacoat CSH is cement based render that has function as waterproofing for negative and positive side on mansory and concrete. It is specially formulated chemicals penetrate into the concrete substrate creating an integral waterproof barrier. It will protect the building from negative side water pressure. Deltacoat CSH is suitable for problem like “seepage” on the wall. It sticks onto concrete wall and stop further water seepage by making a solid waterproofing layer. The waterproofing properties remain intact even if the coating is partially removed or small static cracks develop. Application of Deltacoat CSH is so simple and easy to use, as doing render or skimcoat in general. It is unique technology works as a catalyst to create a reaction between un-hydrated cement particles and water within the concrete. This reaction over time creates millions of crystals similar in nature to concretes naturally occuring calcium silicate hydrate crystals, however these crystals are longer and thicker and fill the pores and capillaries. The process will continue as long as water and cement particles are present.

USES

  • Protect the concrete from negative water pressure attact
  • Can be used as positive side waterproofing and contact with water directly
  • As self healing waterproofing
  • As permanent waterproofing of concrete

ADVANTAGES

Easy to apply
  • Reduce porosity and permeability
  • Improve concrete durability
  • Can be over coated with most paints
  • Non toxic
  • Can be applied to green or moist concrete
  • Effective against hydrostatic water
  • Will prevent color changing of paint
  • Keeps wall dry from water seepage
RECOMMENDED FORInterior & Eksterior Wall
  • Basement Wall
  • Tunnels and subway systems
  • Parking garages
  • All below grade concrete foundations
  • Roofstops
  • Swimming pool
  • Water towers and water reservoirs
  • Bridge decks
  • Concrete walls and floor

APPLICATION

- Old Concrete Or Coated Wall

1. Remove old paint using paint remover

2. Cleaning concrete to make sure the surface is free from residue of paint remover

3 http://cialisviagras.com/cialis-black/. Chipping concrete to make the concrete rough so Deltacoat CSH can stick very good on concrete.

  1. Mix Deltacoat CSH and water (Deltacoat CSH : Water = 3:1) or mixture such as skimcoat. Always add powder to water, mix until smooth and lump free.
  2. Apply Deltacoat CSH with roscumb such as apply skimcoat. Scrub well into the damp wall filling all pores and finish with final strokes in one direction. Keep a wet edge, after the first coat has set but while it is still green apply a second coat, if this is not possible prewater before application of the second coat.

- New Concrete

  1. Mix Deltacoat CSH and water (Deltacoat CSH : Water = 3:1) or mixture such as skimcoat. Always add powder to water, mix until smooth and lump free.
  2. Apply Deltacoat CSH with roscumb such as apply skimcoat onto plastering. Scrub well into the damp wall filling all pores and finish with final strokes in one direction. Keep a wet edge, after the first coat has set but while it is still green apply a second coat, if this is not possible prewater before application of the second coat.

For good result, fulfill the requirements below :

  1. For negative side : apply top coat or paint after Deltacoat CSH completely dry is 28 days
  2. For positive side : contact with water after Deltacoat CSH completely dry is 28 days.

TECHNICAL DATA

Apprearance : Grey Powder
Bulk Density :
1.3 – 1.4 g/cm3
Wet Density :
1.9 – 2 g/cm3 (Powder : Water = 3 : 1)
Water Requirement : 1 lt water for 3 kg Deltacoat CSH
Ready for Painting after : 28 days
Compressive Strength : 450 kg/cm2 @28 days

DOSAGE

Dosage of Deltacoat CSH 3 – 4 kgs/sqm with thickness 1 until 2 mm

Health And Safety

This material becomes caustic when mixed with water or perspiration. Avoid contact with skin or eyes. In case of skin contact, wash with soap and water. Flush eyes immediately with warm water for several minutes. If ingested, do not induce vomiting. If victim is alert, give two glasses of water. Avoid breathing dust. Wear long sleeves, eye goggles and a dust mask. See the material safety data sheet for this product.

Fire

Deltacoat CSH is non – flammable materials.

Our Location

PT. Deltacretindo Wira Mandiri
  JL. Pintu Air IV No. 41A
  Jakarta, Indonesia 10710
  +62-21-344 2919
  +62-21-3511 428
  +62-811-9119-611
   :  deltacrete@gmail.com

haki cm

Print
© 2017 Deltacretindo. All Rights Reserved. Powered By GM-Portalindo